WMD-06 motorized swing gate with the AGG-650 swing panel is an elegant solution for entrance points of banks, administrative buildings, business centers, and other sites with the highest requirements for design and convenience. The swing gates allow organizing luggage and transportation of bulky goods.
Delivery set
- swing gate post with built-in electronics
- tempered glass swing panel of 650 mm
- RC-panel
Swing panel options:
- AGG-650 - swing panel of 650 mm, tempered glass
- AGG-900 - swing panel of 900 mm, tempered glass
Passage zone formation
The passage width of the swing gate is 700 mm.
It is recommended to install the swing gates based on the 12 people/minute peak load for each passage zone.
To increase passage width, the swing gates can be installed in pairs with the swing panels facing each other.
WMD-06 swing gate can be installed standalone or with other PERCo turnstiles. The swing gates can also be completed with railings produced in the same design.
Safety
Upon receiving an emergency signal, the swing gate motor drive opens the swing panel in a previously set direction.
In case of a power loss, the swing panel can be opened manually in both directions.
The control board provides emergency unblocking upon receiving the Fire Alarm signal (Fire Alarm input).
After the Fire Alarm signal is removed or the power supply is restored, the swing panel is set to the initial “Closed” position.
The transparent glass swing panel is fitted with a matt tape along the top edge to prevent people from bumping into it.
Swing gate operation
WMD-06 swing gates can operate as standalone units from RC-panel (included in the delivery set) or WRC (optional), and a part of an access control system (ACS).
The ability to select the control mode (pulse or potential) ensures correct operation in access control systems of any manufacturer.
The operation mode (passage permission and denial) can be set independently for each passage direction. The encoder built into the swing gate post records the actual fact of passage and its direction, which ensures correct accounting of working hours in access control systems.
The control board located in the swing gate post provides a complete set of control modes. The control board has inputs to connect sound indication (siren) and outputs to connect remote indication blocks.
When access is granted, the swing gate automatically opens in the authorized passage direction. Once the passage is complete, the swing panel smoothly returns to its home position.